Easi-Close can be installed in a variety of ways:
- Tack to window frame if built in.
- Built-in as work progresses friction fitting.
- Easi-Close can be installed after the reveal has been constructed by fixing to the inner leaf using grab adhesive.
- Easy to cut to desired width with knife.
If required, sections of Easi-Close can be jointed to minimise waste. All joints must be tightly butted – 450 downwards towards the outer leaf. This will stop potential water penetration.
When jointing horizontal to vertical, trim both PVC flanges and allow the vertical to extend below the horizontal – this stops water ingress.
Stock Length: 2.4m
Packing: 10 lengths per pack