ThermaQuilt Multi-Foil Insulation

ThermaQuilt is an Agrément Certified multifoil insulation with a 2 in 1 insulating vapour control layer. It works by reflecting radiant heat back into the living space retaining warmth, saving money and providing a warmer environment.

Made up of 9 various layers, ThermaQuilt offers high thermal performance – this is achieved by its unique layer configuration.

The outer layers of the product increase the overall thermal performance of the product, this is due to its high reflectiveness.

ThermaQuilt can be used for almost any DIY application including roofs, walls, floors, motor homes, boats, cellars, the opportunities are massive.

Once taped and sealed ThermaQuilt works as a vapour control layer, stopping the passage of moisture, reducing the risk of condensation.

The
advantages of ThermaQuilt insulation are

R-Value up to 2.11 m²K/W, equivalent to 90mm of mineral fibre insulation
Built-in airtight vapour control layer to prevent the passage of moisture, reducing the risk of condensation
Up to 76% reduction in heat loss, saving you money on your energy bills
Suitable for roofs, walls and floors
Manufactured using 84% recycled materials
Retains heat in your home, saving energy and money
Zero fibres removes the need for PPE
Flexible, lightweight and easy to install
Minimal waste compared to traditional insulation products
Fully Agrément Certified, Building Control compliant and NHBC accepted
Made in Britain

Roofs (Lofts)

Using ThermaQuilt Insulation in an existing or new pitched or flat roof is a quick and efficient method of improving the overall thermal performance, Keeping the heat in your home is essential for lowering your energy bills, carbon footprint and best of all saving you money.

Installation

Simply roll the insulation across the rafters or joists, staples into place (using minimum 14mm staples), overlap the material by 50mm, tape and seal all overlaps and perimeter of the product using ThermaWrap Foil Tape. To finish either apply 25mm horizontal battens and plasterboard or leave the insulation exposed in areas that do not require an internal finish.

Walls

Using ThermaQuilt Insulation in a new or existing wall (timber frame or masonry) is a quick and efficient method of improving the overall thermal performance, Keeping the heat in your home is essential for lowering your energy bills, carbon footprint and best of all saving you money.

Installation

Timber frame – Simply roll the insulation across the vertical timber stud, staples into place (using minimum 14mm staples), overlap the material by 50mm, tape and seal all overlaps and perimeter of the product using ThermaWrap Foil Tape. To finish either apply 25mm horizontal battens and plasterboard or leave the insulation exposed in areas that do not require an internal finish.

Masonry – Simply apply 25mm vertical timber battens, roll the insulation across the battens, staples into place (using minimum 14mm staples), overlap the material by 50mm, tape and seal all overlaps and perimeter of the product using ThermaWrap Foil Tape. To finish either apply 25mm horizontal battens and plasterboard or leave the insulation exposed in areas that do not require an internal finish.

Floors

Using ThermaQuilt Insulation in a new or existing timber floor is a quick and efficient method of improving the overall thermal performance, Keeping the heat in your home is essential for lowering your energy bills, carbon footprint and best of all saving you money.

Installation

Simply roll the insulation across the vertical timber joists, staples into place (using minimum 14mm staples), overlap the material by 50mm (leaving the overlaps untapped), tape and seal the perimeter of the product using ThermaWrap Foil Tape. To finish, apply your desired floor finish (floorboards, etc)