ThermaQuilt - Dry Lining

Installation of ThermaQuilt for Dry Lining applications and additional insulation products should be in accordance with the certificate, YBS fixing instructions and current good building practice.

 Vertical counter battens, minimum 25mm by 38mm battens are fixed to the wall at 400 or 600mm centres. Battens must always be placed at the top and bottom of the wall and around the perimeter of doors and windows.

ThermaQuilt is applied directly from the roll either vertically or horizontally depending on the wall height, pulled tight and stapled onto the battens at minimum 300mm centres.

ThermaQuilt should be overlapped at each joint by approx. 50mm and stapled onto the battens, the joins should be sealed using 75mm YBS Foil Tape.

Counter battens are fixed to the wall battens through the material at 400 or 600mm centres.

The plasterboard is fixed over the ThermaQuilt and onto the battens in the usual manner.

ThermaQuilt and 32.5mm PIR backed insulated plasterboard (20mm PIR & 12.5mm plasterboard)0.30 W/m2k